Beo
The concept is a mini monitor placed on a subwoofer. This gives you a free sound plus power and dynamics in the bass. The BEO is particularly compact well proportioned, although it is very powerful. The sound is natural with very low distortion. This makes it one of the most popular speakers in its class.
Design
- 3-way modular loudspeaker
- Air Bass System enables low bass from a relatively small volume with very low distortion and excellent definition
- Multiplex enclosure made of Baltic birch, strutted and bitumen damped
- Special bass reflex system shifts the lower minimum to very low frequencies and allows amplifiers in the low bass range to send more current into the speaker
- Rubberised lacquer finish, also available in high gloss polished on request
- Special ball corners and arrangements of the drivers prevent refraction at high frequencies This improves localisation
Technical data
- Impedance: 4 Ohm
- Efficiency 89dB / 1m / 2.85V
- Power rating: 300W
- Recommended amplifier: 30W to 300W, tube or transistor
- Frequency response: (-3dB) 20Hz - 25kHz
- Linearity: +- 2dB over 100 Hz
- Crossover frequency: 170 Hz, 1.7 kHz
- Distortion factor at 95 dB: above 100 Hz, below 0.5% K2, below 0.1% K3
- Reflex tuning: 22Hz, QB3
- Dimensions: 940 mm H, 290 mm W, 440 mm D
- Weight: 35 kg
- Principle: Modular 3-way floorstanding loudspeaker with AIR BASS system
Configuration
- Tweeter: 29mm Satori ring radiator with powerful neodymium driveer. Milled aluminium front with decoupling ring. Rear end with light metal cast cabinet
- Midrange driver: 15 cm Scan-Speak midrange driver with cone made of NRSC glass fibre fabric, voice coil on non-conductive carrier, magnet system with Faraday ring
- Bass: 26 cm Scan-Speak Bass with extremely stable membrane made of anodized aluminium with carbon dustcap